Description
Click on Product Name for more information
ClikMagnet Regular Black 20pc
If you haven't already seen the video demonstration, showing how the Clik-Clik system allows suspension without a ladder, click here now to view it, then return.
Clik Magnets are the heart of the Clik-Clik system. They are small powerful magnets with rings that "Clik" onto the ceiling. Their plastic coating prevents ceiling scratches, while the balanced center ring allows both maximum pull on the magnet and proper placement on a MagMover for easy installation and removal.
Choose the right size for your project:
Regular ClikMagnets
1 3/4" x 1/2" x 3/5" (4.4 cm x 1.3 cm x 1.5 cm)
--- 20/bag Item #94288
Regular ClikMagnets will hold up to 5 lbs.* (2 kg*). They are suitable for hanging a wide variety of mid-weight signs, products and decorations.
Super ClikMagnets
2 3/10" x 4/5" x 3/5" (5.8 cm x 2.0 cm x 1.5 cm)
--- 10/bag Item #95270
Super ClikMagnets are extra strong magnets supporting up to 10 lbs.* (4 kg*) each. Designed for hanging signs, fabric and larger items, they now feature double rings. The upper ring fits securely on the MagMover post. The larger bottom ring allows thicker tether lines to be used, and makes removal from the ceiling easier.
*Note: Actual magnet strength depends on the type and surface treatment of the ceiling metal. If the ceiling is rough or covered with layers of paint, the magnetic attraction will be reduced (it's always a good idea to test the surface in advance).
SAFETY WARNINGS:
Keep all magnets away from credit cards, video tapes, computers and other electronic devices!
The Clik-Clik system is not recommended for use with S-hooks, as items may fall during takedown.
ClikMagnet positioning on a MagMover depends on the application. See placement instructions.
Placing ClikMagnets on your MagMover
Using a new MagMover?
The ClikMagnets can be positioned for either ceiling or wall installation
:
Ceiling Installation (see photo above):
Put the stem holding the ring into the center hole, allowing a portion of the ring to fall into the slot. The magnet should rest on top of the post, facing the ceiling.
Using an older style MagMover (no slot through the post)?
The ClikMagnets are positioned as shown above. The ring should completely surround the post with the Magnet facing up. The stem holding the ring should NOT go in the center hole when using an older style MagMover.
For best results, secure your suspension line with a small tight knot. Align both this knot, and the stem holding the ring, with the gaps between the ring and the flat sides of the MagMover post. That way the MagMover will easily release the ClikMagnet upon contact with metal beams or suspended ceiling bars, hanging your item.
